, o ne. 20 stern ave. springfield, new jersey 07081 u.s.a. telephone: (973) 376-2922 (212) 227-6005 fax: (973) 376-8960 high currant bridge rectifier mb series reverse voltage: 50 -1000 volts forward current: 10/1 5/25/35/50 amp features surge overload 200 -400 amp peak low forward voltage dro mounting position: any electrically isolated base - 1 800 volts solderable0.25"fastonterminals materials used carries u/l recognition mechanical data case:metal casewith electrically isolated epoxy terminals: plated leads solderable per mil-std-202, method 208 mounting: through hole for#10 screw weight: 30 grams (approx.) - "w" suffix designates wire leads - no suffix designates faston terminals mb mb-w dim a b c d e g h terminals min 28.40 10.97 15.70 17.50 22.86 max 28.70 11.23 16.70 18.50 25.40 lead min 28.40 10.97 17.10 10.90 30.50 max 28.70 11.23 19.10 11.90 - hole for #10 screw, 5.080 nominal 6.35 typical 0.970 1.070 all dimension in mm maximum ratings and electrical characterics rating at 25c ambient temperature unless otherwise specified. resistive or inductive load 60hz. for capacitive load current by 20% characteristics maximum recurrent peak reverse voltage maximum rms bridge input voltage maximum forward voltage drop per element at 5.0/7.5/12.5/17.5/25.0a peak maximum reverse current at rate dc blocking voltage per element @ ta = 25c operating temperature range tc storage temperature range ta mb 1005 1505 2505 3505 5005 50 35 mb 101 151 251 351 501 100 70 mb 102 152 252 352 502 200 140 mb 104 154 254 354 504 400 280 mb 106 156 256 356 506 600 420 mb 108 158 258 358 508 800 560 mb 1010 1510 2510 3510 5010 1000 700 1.2 10 -55 to +125 -55 to +150 unit v v v ua c c nj semi-conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. information furnished by nj semi-conductors is believed to be both accurate and reliable at the time of going to press. however. nj semi-conductors assumes no responsibility for any errors or omissions discovered in its use. nj semi-conductors encourages customers to verify that datasheets are current before placing orders. quality semi-conductors
high current bridge rectifier maximum ratings and electrical characterics characteristics maximum average forward rectified output current @ tc = 55c peak forward surge current 8.3ms single half sine-wave super imposed on rated load MB1005 -1010 10 200 mb1505 -1510 15 300 mb2505 -2510 25 300 mb3505 -3510 35 400 mb5005 -5010 50 400 unit a a notes: also available on mb 10w/15w/25w/35w/50w series. rating and characteristic curves (mb10, 15, 25, 35, 50) fig. 1 - reverse characteristics fig. 2 - forward characteristics 10 0 20 40 60 80 100 120 140 percent of rated peak reverse voltage (%) fig. 3 - non repetitive forward surge current 1 510 50 1 00 number of cyclesat 60hz 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.' forward voltage (v) fig. 4 - current derating curve 0 25 50 75 100 125 150 ambient temperature ( c)
|
